Skip to main content

End Vertical at Pipe Connection

The End Vertical at Pipe Connection command is used to insert a connecting pipe to the end of the pipe, which rises or drops from the elevation of the pipe to the elevation of the fixture and then goes directly toward the fixture.

To make a vertical end connection at the pipe, go to
Ribbon: DM Plumbing→Fixtures→  End Vertical at Pipe Connection
Pulldown Menu: DM Plumbing→Fixtures→End Vertical at Pipe Connection

You will be prompted to identify which fixture to connect to a pipe.

Select fixture to connect:

You will then be prompted to select the pipe to which the fixture will be connected.

Select pipe to connect to:

The fixture and the pipe will be connected.

Related Options

Break width: Sets the width of the break in a pipe if it is overlapped by another pipe.

Vertical pipe drafting method: Sets how vertical pipes are drawn.
This option can be further customized with the Minimum vertical pipe diameter and Not to scale vertical pipe diameter options.