Skip to main content

Direct 90 Vertical at Pipe Connection

The Direct 90 Vertical at Pipe Connection command is used to insert a connecting pipe that rises or drops from the elevation of the pipe to the elevation of the fixture, then connects to the fixture at a 90-degree angle to the pipe.

To make a direct 90 vertical connection at the pipe, go to
Ribbon: DM Plumbing→Fixtures→  Direct 90 Vertical at Pipe Connection
Pulldown Menu: DM Plumbing→Fixtures→Direct 90 Vertical at Pipe Connection

You will be prompted to identify which fixtures to connect to a pipe.

Select fixtures to connect:

You will then be prompted to select the pipe to which the selected fixtures will be connected.

Select pipe to connect to:

The fixtures and the pipe will be connected.

Related Options

Break width: Sets the width of the break in a pipe if it is overlapped by another pipe.

Vertical pipe drafting method: Sets how vertical pipes are drawn.
This option can be further customized with the Minimum vertical pipe diameter and Not to scale vertical pipe diameter options.