Skip to main content

Direct 45 Vertical at Wall

The Direct 45 Vertical at Wall command is used to insert a connecting pipe at a 45-degree angle to the pipe. The connecting pipe then rises or drops inside a wall from the elevation of the pipe to the elevation of the fixture before connecting to the fixture.

To make a direct 90 connection with a vertical pipe in a wall, go to
Ribbon: DM Plumbing→Fixtures→  Direct 45 Vertical at Wall
Pulldown Menu: DM Plumbing→Fixtures→Direct 45 Vertical at Wall

You will be prompted to identify which fixtures to connect to a pipe.

Select fixtures to connect:

You will then be prompted to select the pipe to which the selected fixtures will be connected.

Select pipe to connect to:

You will then be prompted to select a point inside the wall in which the vertical pipes will be inserted.

Specify point inside wall where vertical pipes will be located:

The fixtures and the pipe will be connected.

Related Options

Break width: Sets the width of the break in a pipe if it is overlapped by another pipe.

Vertical pipe drafting method: Sets how vertical pipes are drawn.
This option can be further customized with the Minimum vertical pipe diameter and Not to scale vertical pipe diameter options.