Building Definition
This section describes the commands available to define rooms, floors, and zones.
Categories & Commands
📄️ Project Info
The Project Info command is used to set the main information used during load calculations for the project.
🗃️ Zones
This section describes the commands used to create zones for building load calculations. 2 items
🗃️ Floors & Roofs
This section describes the commands used to create floors for building load calculations. 4 items
🗃️ Rooms
This section describes the commands used to create and modify rooms. 9 items
🗃️ Walls
This section describes the commands used to modify the boundaries of rooms, including setting boundaries as exterior walls and adding and removing points on the rooms. 10 items
🗃️ Schedules
This section describes the commands used to modify the schedules used in your building definition. 1 items
🗃️ Reports
This section describes the commands used to generate two miscellaneous building-related reports. These reports include information based solely upon the building definition settings. 2 items
📄️ Transfer Building Information from Electrical
The Transfer Building Information from Electrical command is used to copy floor and room definitions from a Design Master Electrical project. Using this command allows you to define the building once and use it in both the HVAC and electrical project.