2D Drafting

This section describes the commands used to draw the ductwork in 2D and modify the duct size labels that are inserted.

📄️ Draw Double Line (Branch)

The Draw Double Line (Branch) command is used to draw the 2D ductwork for all of the ducts in a system.

📄️ Draw Double Line (Window)

The Draw Double Line (Window) command is used to draw the 2D ductwork for all of the ducts in a windowed area.

📄️ Erase Double Line (Branch)

The Erase Double Line (Branch) command is used to erase the 2D ductwork for all of the ducts in a system.

📄️ Erase Double Line (Window)

The Erase Double Line (Window) command is used to erase the 2D ductwork for all of the ducts in a windowed area.

📄️ Move Label

The Move Label command is used to move 2D ductwork labels. If you manually move the label without using this command, the label will be moved back to its original position when the 2D ductwork is redrawn.

📄️ Rotate Label to Angle 0

The Rotate Label to Angle 0 command is used to rotate 2D ductwork labels. If you manually rotate the label without using this command, the label will be rotated back to match the duct angle when the 2D ductwork is redrawn.

📄️ Reset Label to Default Location

The Reset Label to Default Location command is used to undo any changes to duct labels moved by the Move Label command, rotated by the Rotate Label to Angle 0 command, or removed by the Remove Label command.

📄️ Remove Label

The Remove Label command is used to remove a duct label from the drawing. If you use the standard CAD ERASE command, the label will be reinserted when the 2D ductwork is redrawn.