Insert General Photometric Calculation Line
The
To insert a general calculation line on the drawing, go to
Ribbon:
Pulldown Menu:
Insert Calculation Line Dialog Boxâ
See the Common Photometric Boundary Information section for information about the values in this dialog box.
Inserting the Calculation Line on the Drawingâ
To insert the calculation line on the drawing, press the button. The settings you specified in the dialog box will be used for the line.
You will be prompted to draw the calculation line on the drawing.
Specify first point of calculation line or [<Select existing line>]:
-
Â
First point of calculation area
Specify a point on the drawing. Continue specifying points on the drawing until the calculation line is complete. Press ENTER to finish drawing the calculation line. -
Â
Select existing line
Press ENTER to draw the calculation line by tracing a polyline on the drawing. Specify the polyline on the drawing to be traced. You will be asked whether to erase the polyline after the calculation line is inserted.
If you checked â Calculate Vertical Illuminance Levels, you will then be prompted to specify on which side of the line the vertical illuminance levels will be displayed.
Specify side to place vertical illuminance values:
You will then be prompted to insert the calculation schedule, group the calculation line with an area, or press ENTER to finish the command.
Specify insertion point for calculation schedule or point inside boundary to group with:
-
Â
Insert the calculation schedule
To insert the calculation schedule, select a point on the drawing that is not inside of a calculation area. The calculation schedule will be inserted at the point specified. -
Â
Group with an area or group
To group the line with an area or group, select a point on the drawing that is inside of a calculation area. They will be grouped. If the selected calculation area already has a calculation schedule on the drawing, that calculation schedule will be used for the group. If it does not have a calculation schedule, no calculation schedule will be used for the group. -
Â
Finish the command
Press ENTER to finish the command without inserting a calculation schedule or grouping the calculation line with an area or group. No calculation schedule will be inserted and the calculation line will be in its own separate group.
Schedule title justification: Sets the justification for the schedule title.
Schedule column label justification: Sets the justification for column headings.
There are several options that set the default values for this dialog box. See the General Point-by-Point Photometrics Options section for more information.