Skip to main content

Edit Switchboard List

To edit switchboard list project settings, go to
Ribbon: DME: Customization→Project Customization→  Switchboard List Label Group
Pulldown Menu: DM Electrical→Customization→Labels and Schedules→Project List→Edit Switchboard List

To edit switchboard list master settings, go to
Ribbon: DME: Customization→Master & Standards Customization→  Edit Distribution Equipment Master Groups
Pulldown Menu: DM Electrical→Customization→Labels and Schedules→Standards and Master Lists→Edit Distribution Equipment Master Groups

Switchboard List Label Display and Order Dialog Box​

See the Common Label and Schedule Information section for more information about using the and buttons and the Key ☰, Label, Width, Justification ▾, and ☐ Display fields.

Values in the Key ☰ column are listed alphabetically below.

  •  AIC This value is taken from the switchboard definition.

  •  Bus Amps This value is taken from the switchboard definition.

  •  Callout The name of the switchboard.

  •  Fault The total fault in amps at the switchboard, including the fault from the utility and the fault from any motors in the system.

  •  Feeder Size This value is taken from the switchboard definition.

  •  IG Bus This value is taken from the switchboard definition.

  •  List Note 1 This value is taken from the switchboard definition.

  •  List Note 2 This value is taken from the switchboard definition.

  •  List Note 3 This value is taken from the switchboard definition.

  •  Location This value is taken from the switchboard definition.

  •  Lugs This value is taken from the switchboard definition.

  •  Main Disconnect Amps This value is taken from the switchboard definition.

  •  Main Disconnect Type This value is taken from the switchboard definition.

  •  Manufacturer This value is taken from the switchboard definition.

  •  Model This value is taken from the switchboard definition.

  •  Mounting This value is taken from the switchboard definition.

  •  Neutral This value is taken from the switchboard definition.

  •  NEMA This value is taken from the switchboard definition.

  •  Note 1 This value is taken from the switchboard definition.

  •  Note 2 This value is taken from the switchboard definition.

  •  Number of Taps This value is taken from the switchboard definition.

  •  Short Voltage The voltage value and poles of the switchboard.

    Examples: 208Y/120V 1P, 208V 2P

  •  Total Calculated Amps The total calculated load in amps of the switchboard.

  •  Total Calculated KVA The total calculated load in kVA of the switchboard.

  •  Total Connected Amps The total calculated load in amps of the switchboard.

  •  Total Connected KVA The total calculated load in kVA of the switchboard.

  •  Upstream Breaker and Poles The size of the breaker and number of poles for the switchboard feeder.

    Examples: 20/1, 30/3

  •  Upstream Circuit The circuit to which the switchboard is connected on the upstream device.

  •  Upstream Device The upstream device to which the switchboard is connected.

  •  Upstream OCP This value is taken from the switchboard definition.

  •  Utility Fault The utility fault in amps at the switchboard.

    tip

    Use this column instead of the Fault column if you do not want to include motor contributions.

  •  Volts The full voltage value of the switchboard. The volts, poles, and wires will be displayed.

    Examples: 208Y/120V 1P 2W, 208V 2P 2W

  •  Volts Only The voltage value of the switchboard. Only the volts will be displayed. The poles and wires will not be displayed.

    Examples: 208Y/120V, 208V