Skip to main content

Edit Meter Center List

To edit meter center list project settings, go to
Ribbon: DME: Customizationā†’Project Customizationā†’  Meter Center List Label Group
Pulldown Menu: DM Electricalā†’Customizationā†’Labels and Schedulesā†’Project Listā†’Edit Meter Center List

To edit meter center list master settings, go to
Ribbon: DME: Customizationā†’Master & Standards Customizationā†’  Edit Distribution Equipment Master Groups
Pulldown Menu: DM Electricalā†’Customizationā†’Labels and Schedulesā†’Standards and Master Listsā†’Edit Distribution Equipment Master Groups

Meter Center List Label Display and Order Dialog Boxā€‹

See the Common Label and Schedule Information section for more information about using the and buttons and the Key ā˜°, Label, Width, Justification ā–¾, and ā˜ Display fields.

Values in the Key ā˜° column are listed alphabetically below.

  •  AIC This value is taken from the meter center definition.

  •  Bus Amps This value is taken from the meter center definition.

  •  Callout The name of the meter center.

  •  Fault The total fault in amps at the meter center, including the fault from the utility and the fault from any motors in the system.

  •  Feeder Size This value is taken from the meter center definition.

  •  IG Bus This value is taken from the meter center definition.

  •  List Note 1 This value is taken from the meter center definition.

  •  List Note 2 This value is taken from the meter center definition.

  •  List Note 3 This value is taken from the meter center definition.

  •  Location This value is taken from the meter center definition.

  •  Lugs This value is taken from the meter center definition.

  •  Main Disconnect Amps This value is taken from the meter center definition.

  •  Main Disconnect Type This value is taken from the meter center definition.

  •  Manufacturer This value is taken from the meter center definition.

  •  Model This value is taken from the meter center definition.

  •  Mounting This value is taken from the meter center definition.

  •  NEMA This value is taken from the meter center definition.

  •  Neutral This value is taken from the meter center definition.

  •  Note 1 This value is taken from the meter center definition.

  •  Note 2 This value is taken from the meter center definition.

  •  Number of Taps This value is taken from the meter center definition.

  •  Short Voltage The voltage value and poles of the meter center.

    Examples: 208Y/120V 1P, 208V 2P

  •  Total Calculated Amps The total calculated load in amps of the meter center.

  •  Total Calculated KVA The total calculated load in kVA of the meter center.

  •  Total Connected Amps The total calculated load in amps of the meter center.

  •  Total Connected KVA The total calculated load in kVA of the meter center.

  •  Upstream Breaker and Poles The size of the breaker and number of poles for the meter center feeder.

    Examples: 20/1, 30/3

  •  Upstream Circuit The circuit to which the meter center is connected on the upstream device.

  •  Upstream Device The upstream device to which the meter center is connected.

  •  Upstream OCP This value is taken from the meter center definition.

  •  Utility Fault The utility fault in amps at the meter center.

    tip

    Use this column instead of the Fault column if you do not want to include motor contributions.

  •  Volts The full voltage value of the meter center. The volts, poles, and wires will be displayed.

    Examples: 208Y/120V 1P 2W, 208V 2P 2W

  •  Volts Only The voltage value of the meter center. Only the volts will be displayed. The poles and wires will not be displayed.

    Examples: 208Y/120V, 208V