Skip to main content

Edit Bus Gutter / Duct List

To edit bus gutter and bus duct list project settings, go to
Ribbon: DME: Customization→Project Customization→  Bus Gutter / Bus Duct List Label Group
Pulldown Menu: DM Electrical→Customization→Labels and Schedules→Project List→Edit Bus Gutter / Duct List

To edit bus gutter and bus duct list master settings, go to
Ribbon: DME: Customization→Master & Standards Customization→  Edit Distribution Equipment Master Groups
Pulldown Menu: DM Electrical→Customization→Labels and Schedules→Standards and Master Lists→Edit Distribution Equipment Master Groups

Bus Gutter List Label Display and Order Dialog Box

See the Common Label and Schedule Information section for more information about using the and buttons and the Key ☰, Label, Width, Justification ▾, and ☐ Display fields.

Values in the Key ☰ column are listed alphabetically below.

  •  AIC This value is taken from the bus gutter definition.

  •  Bus Amps This value is taken from the bus gutter definition.

  •  Callout The name of the bus gutter.

  •  Fault The total fault in amps at the bus gutter, including the fault from the utility and the fault from any motors in the system.

  •  Feeder Size This value is taken from the bus gutter definition.

  •  List Note 1 This value is taken from the bus gutter definition.

  •  List Note 2 This value is taken from the bus gutter definition.

  •  List Note 3 This value is taken from the bus gutter definition.

  •  Location This value is taken from the bus gutter definition.

  •  Manufacturer This value is taken from the bus gutter definition.

  •  Model This value is taken from the bus gutter definition.

  •  Mounting This value is taken from the bus gutter definition.

  •  NEMA This value is taken from the bus gutter definition.

  •  Note 1 This value is taken from the bus gutter definition.

  •  Note 2 This value is taken from the bus gutter definition.

  •  Number of Taps This value is taken from the bus gutter definition.

  •  Short Voltage The voltage value and poles of the bus gutter.

    Examples: 208Y/120V 1P, 208V 2P

  •  Total Calculated Amps The total calculated load in amps of the bus gutter.

  •  Total Calculated KVA The total calculated load in kVA of the bus gutter.

  •  Total Connected Amps The total calculated load in amps of the bus gutter.

  •  Total Connected KVA The total calculated load in kVA of the bus gutter.

  •  Upstream Breaker and Poles The size of the breaker and number of poles for the bus gutter feeder.

    Examples: 20/1, 30/3

  •  Upstream Circuit The circuit to which the bus gutter is connected on the upstream device.

  •  Upstream Device The upstream device to which the bus gutter is connected.

  •  Upstream OCP This value is taken from the bus gutter definition.

  •  Utility Fault The utility fault in amps at the bus gutter.

    tip

    Use this column instead of the Fault column if you do not want to include motor contributions.

  •  Volts The full voltage value of the bus gutter. The volts, poles, and wires will be displayed.

    Examples: 208Y/120V 1P 2W, 208V 2P 2W

  •  Volts Only The voltage value of the bus gutter. Only the volts will be displayed. The poles and wires will not be displayed.

    Examples: 208Y/120V, 208V