Skip to main content

Three-Phase Lighting Circuits

To connect 1-phase or 2-phase lights to a 3-phase circuit, follow these steps:

  1. Run the Circuiting command.
  2. Select the circuit and press the  button on the right side of the dialog box.
  3. Set the ☐ Number of Poles to Threeand press the button.
  4. Press the Circuit to Phase button to circuit the light fixtures to specific phases of the circuit. You will be prompted for the phase to use for the first light fixture.

After you circuit one fixture, you can press ENTER once, then type S to change the phase to which you are connecting devices.